With double-sided sticker

  1. Remove one side of the supplied double-sided sticker.
  2. Stick the sticker on the back of Jip.
  3. Remove the other side of the double-sided sticker.
  4. Place Jip on the wall.



With screw

Make sure the back is not on Jip yet.

  1. Screw the back of Jip to the wall. Use the screw hole for this. Note: Only a countersunk screw will fit. Make sure that it does not protrude above the edges next to the screw hole.
  2. Place Jip on the back and turn clockwise.