Internet
Follow these steps to reset the WiFi connection and reconnect the Adam to WiFi: 1 - Delete the network settings (optional) Press the black button on...
Wed, 17 Feb, 2021 at 4:24 PM
Wait for the Adam to boot up completely before attempting to connect to it. The Adam is in login mode when the “WLAN” and Status ”lights are flashing slowly...
Fri, 12 Mar, 2021 at 3:57 PM
Press the black button on Adam for 5 seconds. You can count with the blinking of the light. Release the black button when the light has blinked 5 times and ...
Wed, 17 Feb, 2021 at 4:14 PM
Press the black button on the Adam for 5 seconds. You can count with the blinking of the middle Status light. Release the black button when the light has bl...
Wed, 17 Feb, 2021 at 4:13 PM
2,4 Ghz The signal of a wireless WiFi network is transmitted on a frequency of 2.4 GHz or 5.0 GHz. The gateway (Adam, Anna, Smile P1) can only connect to a...
Mon, 29 Mar, 2021 at 1:54 PM
When you first install Adam, Adam is not yet connected to the internet. Only then Adam is in access point mode and 192.168.40.40 is available. Check if...
Wed, 5 May, 2021 at 5:52 PM
If Adam is not yet connected to the internet and in login mode: Make sure your smartphone or tablet is connected to the Adam's network (which starts wi...
Wed, 17 Feb, 2021 at 4:09 PM
Check the WiFi range where you placed the Adam. When your smartphone indicates that there is a WiFi range of at least 2 reception lines, you can assume that...
Wed, 17 Feb, 2021 at 4:08 PM
A WiFi extender, multiple access points or WiFi via the socket (powerline) can offer a solution to amplify the signal. A WiFi repeater / amplifier that send...
Wed, 17 Feb, 2021 at 4:05 PM
A WiFi repeater / amplifier that sends out its own signal often does not improve the network in our experience. A WiFi extender, multiple access points or W...
Wed, 17 Feb, 2021 at 4:04 PM