Plugwise

If you are unable to add a module to Adam, you can try one of the following:   Try registering the module closer to the Adam. If you register a module, i...

You registered Lisa while she was on USB power. As a result, Lisa now acts as a router with which other modules talk to Adam via Lisa. Lisa uses more energy...

You have probably put all modules on batteries, so that no module is a router. In that case, the Zigbee stick in the Adam can make contact with a maximum of...

The icon of no connection is sometimes displayed incorrectly. You can use the app to check whether Lisa still responds to a set temperature change. To remov...

If Lisa is powered by batteries they are probably empty. Are the batteries not empty or is Lisa powered by USB? Then take Lisa off the power for 5 seconds a...

Something went wrong with Adam. Get the power from Adam for 5 seconds. After Adam has started, all modules will make contact again.

Remove the back cover from the Lisa. Press the button on the back for 3+3+10 seconds. Make sure you press the button again within a second before the next...

There are two Homey apps available that allow Lisa to work together with Homey. Plugwise app for Homey Website: https://homey.app/en-gb/app/com.plug...